> Products >Consumer X Series > EMC
Return
CKTC10626
EMC
Low magnetic loss
High saturation current
We can customize products according to your requirements.
Product Info
Product Uses
Useful in a wide variety of EMI/RFI choke,input filter.
Useful in a wide variety of power converter and line filter applications.
Filter inductor in high power switching;
Main transformer in UPS;
We can customize products according to your requirements. Please consult our sales.
Product Parameters
Sample Apply
Series
Model
PDF
Inductance
(μH)
CommonMode
(Ω)
Impedance
(Ω)
Inductance/
Impedance tolerance
Test conditions
DCR
(mΩ)
Isat
TYP(A)
Irms
TYP(A)
Use
State
Temperature
(℃)
Length
(mm)
Width
(mm)
Height
(mm)
Package
Shield
Material
3D Image
Apply
Toroidal Inductor
CKTC10626
90uH-2000uH
-
-
-
-
-
-
-
consumer
In Production
-
36
19.5
36
DIP
N
Metal Alloy
Notes
All data is tested under the condition of ambient temperature of 25℃.
Inductance test condition is 100kHz, 1.0V.
Saturation current: the actual DC current value applied when the inductance value drops by 30% from its initial value.
Temperature rise current: the actual DC current value applied to raise the product temperature by ΔT40℃ (Ta=2030℃).
Special reminder: Circuit design, component layout, printed circuit board (PCB) size and thickness, and heat dissipation system can all affect the product temperature.
Please make sure to verify the heat dissipation status of the product in the final application.
Save
Storage conditions for the product in packaging: Temperature of 5-40°C, relative humidity ≤ 70%.
If removed for use, please seal the remaining product in a plastic bag and store it according to the above conditions to prevent oxidation of the terminals (electrodes) and affect the soldering status.
It is not recommended to store the product for more than 2015 months as the terminals may degrade under other influences, leading to poor solderability.
Please do not store the product in environments with high temperature, high humidity, dust, or corrosive gases.
Handle with care and avoid damage caused by dropping or improper handling of the product.
Grease on hands can reduce solderability, so direct contact with terminals should be avoided.
Related Product