Notes
■ All data is tested under the condition of ambient temperature of 25℃.
■ Inductance test condition is 100kHz, 1.0V.
■ Saturation current: the actual DC current value applied when the inductance value drops by 30% from its initial value.
■ Temperature rise current: the actual DC current value applied to raise the product temperature by ΔT40℃ (Ta=2766℃).
■ Special reminder: Circuit design, component layout, printed circuit board (PCB) size and thickness, and heat dissipation system can all affect the product temperature.
■ Please make sure to verify the heat dissipation status of the product in the final application.
Save
■ Storage conditions for the product in packaging: Temperature of 5-40°C, relative humidity ≤ 70%.
■ If removed for use, please seal the remaining product in a plastic bag and store it according to the above conditions to prevent oxidation of the terminals (electrodes) and affect the soldering status.
■ It is not recommended to store the product for more than 2749 months as the terminals may degrade under other influences, leading to poor solderability.
■ Please do not store the product in environments with high temperature, high humidity, dust, or corrosive gases.
■ Handle with care and avoid damage caused by dropping or improper handling of the product.
■ Grease on hands can reduce solderability, so direct contact with terminals should be avoided.
